2017 - 2020 Mitsubishi ASX Fuse Box Diagram

2020 Mitsubishi ASX (RVR)

Fuses and Relays

To prevent damage to the electrical system due to short-circuiting or overloading, each  individual circuit is provided with a fuse.
There are fuse blocks in the passenger compartment and in the engine compartment.
 

Passenger Compartment Fuse Box - LHD vehicles

 

 

The fuse blocks in the passenger compartment are located behind the fuse lid in front of the driver’s seat at the position shown in the illustration.

 

Passenger compartment (LHD vehicles)

A- Main fuse block
B- Sub fuse block

 

1. Insert a straight blade (or minus) screwdriver into the notch of the fuse lid and pry gently to remove it.

 

2. To put back the fuse lid, line up the fuse lid hook (A) with the clamp (B) on the instrument panel and push the lid back in.

 

Passenger Compartment Fuse Box - RHD vehicles

The fuse boxes in the passenger compartment are located behind the glove box at the  position shown in the illustration.

Passenger compartment (RHD vehicles)

A- Main fuse block
B- Sub fuse block

Passenger compartment fuse location (LHD - Left Hand Drive))

Passenger compartment fuse location (RHD - Right  Hand Drive))

No. .. Electrical system ... Capacity
1 Heater 30 A*1
2 Stop lamps (Brake lamps) 15 A
3 Rear fog lamp 10 A *2
4 Windscreen wipers 30 A
5 Option 10 A
6 Door locks 20 A
7 Radio 15 A
8 Control unit relay 7.5 A
9 Interior lamps (Room lamps) 15 A
10 Hazard warning flasher 15 A
11 Rear window wiper 15 A
12 Instruments 7.5 A
13 Cigarette lighter/ Accessory socket 15 A
14 Ignition switch 10 A
15 Sunroof 20 A
16 Outside rearview mirrors 10 A
17 4-wheel drive system 10 A
18 Reversing lamps (Backup lamps) 7.5 A
19 Accessory socket 15 A
20 Electric window control 30 A*1
21 Rear window demister 30 A*1
22 Heated door mirror 7.5 A
23 Passenger’s power seat 25 (20) A
24 Driver’s power seat 25 (20) A
25 Heated seat 30 A

*1: Fusible link
*2: Even if your vehicle is equipped with the rear fog lamp, the fuse of the rear fog lamp may not be installed on your vehicle.

- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.
- The table above shows the main equipment corresponding to each fuse.  

 

Sub Fuse Block

 

Remove the cover from the bottom of the glove box.

 

Remove the cover from the bottom of the glove box.

Sub Fuse Block

No. ... Electrical system ... Capacity
1 Battery current sensor 7.5 A

 

- Some fuses may not be installed on your vehicle, depending on the vehicle model or specifications.

- The table above shows the main equipment corresponding to each fuse.

Engine compartment Fuse Block

In the engine compartment, the fuse blocks are located as shown in the illustration. While
pressing the tab (C), pull up the cover.

Engine compartment Fuse Block

A- Main fuse block
B- Sub fuse block*
 

Engine Compartment Fuse PanelDiagram

No. ...  Electrical system  ... Capacity
1 Front fog lamps 15 A
2 Engine 7.5 A
3 Automatic transmission 20 A
4 Horn 10 A
5 Alternator 7.5 A
6 Headlamp washer 20 A
7 Air conditioning 10 A
8 ETV/Oil cooler fan (Twin Clutch SST) 15 A
9 Security horn 20 A
10 Heated steering wheel (2017 Model - Wiper de-icer) 15 A
11 — — —
12 Electric tailgate 30 A
13 Daytime running lamps (DRL) 10 A
14 Headlamp highbeam (left) , LED ,  Halogen , Discharge ... 10 A
15 Headlamp highbeam (right) l LED l Halogen l Discharge 10 A
16 Headlamp low beam (left)- Discharge 20 A
17 Headlamp low beam (right) l Discharge 20 A
18 Headlamp low beam (left) l LED l Halogen 10 A
19 Headlamp low beam (right) l LED l Halogen 10 A
20 ENG/POWER 10 A
21 Ignition coil 10 A
22 ENG/POWER 20 A ; Fuel line heater 25 A
23 Fuel pump 15 A
24 Starter 30 A*1
25 Valve lift control 40 A*1
26 Anti-lock brake system (ABS) 40 A*1
27 Anti-lock brake system (ABS) 30 A*1 

28 Air conditioning condenser fan motor 30 A*1
29 Radiator fan motor 40 A*1
30 IOD IOD (Ignition Current Off Draw) 30 A
31 Audio system amp 30 A
32 Diesel 30 A
33 — Spare fuse 10 A
34 — Spare fuse 15 A
35 — Spare fuse 20 A

*1: Fusible link

 

Fuse replacement

 

1. Before replacing a fuse, always turn off the electrical circuit concerned and turn the ignition switch to the “LOCK” position or put the operation mode in OFF.
2. Remove the fuse puller (A) from the inside of the fuse box in the engine compartment.

Fuse Puller Location

3. Referring to the fuse load capacity table, check the fuse pertaining to the problem.

 

Good Fuse , Blown Fuse

B - Fuse is OK
C - Blown fuse

 

NOTE
- If any system does not function but the fuse corresponding to that system is normal, there
may be a fault in the system elsewhere. We recommend you to have your vehicle checked.

4. Use the fuse puller to insert a new fuse with the same capacity. Make sure you insert the fuse into the same location in the fuse block.

Using Fuse Puller