2012- 2014 Mazda 2 - Fuses panel Diagram

2014 Mazda 2

Fuses and Relays

 

Your vehicle's electrical system is protected by fuses.
If any lights, accessories, or controls don't work, inspect the appropriate circuit protector.
If a fuse has blown, the inside element will be melted.
If the same fuse blows again, avoid using that system and consult an Authorized Mazda Dealer as soon as possible.

Fuse Replacement - Replacing the fuses on the vehicle's left side

If the electrical system does not work, first inspect the fuses on the vehicle's left side.

1. Make sure the ignition is switched off, and other switches are off.
2. Remove the cover.

3. Pull the fuse straight out with the fuse puller provided on the inside of the engine  compartment fuse block cover.

Fuse Puller

4. Inspect the fuse and replace it if it'sblown.

 

Normal fuse, Blown fuse

5. Insert a new fuse of the same amperage rating, and make sure it fits tightly. If it does not fit tightly, have an expert install it. We recommend an Authorized Mazda Dealer. If you have no spare fuses, borrow one of the same rating from a circuit not essential to vehicle operation, such as the MIRROR or CIGAR circuit.

6. Reinstall the cover and make sure that it is securely installed.

CAUTION

Always replace a fuse with one of the same rating. Otherwise you may damage the electric system.

Mazd2 - fuses on the vehicle's left side

Fuse assignment in Left side

 

Left Side - Fuse box / schematic diagram of the fuse box

DESCRIPTION ..... FUSE RATING...............PROTECTED COMPONENT

1 TCM ― ―

2 ILLUMI 7.5 A Dashboard illumination

3 CIGAR  15A Accessory Socket (Cigarette Lighter)

4 MIRROR  7.5A  Power control mirror

5 M.DEF  7.5A Mirror defroster *

6 S.WARM ― ―

7 A/C 7.5A Air conditioner

8 F.WIP 20A Front window wiper and washer

9 R.WIP  10A  Rear window wiper and washer

10 STARTER ― ―

11 METER. 2 ― ―

12 ENG 10A Engine control system

13 METER  10A Instrument cluster

14 SAS  10A  Air bag

15 AUDIO 3 ― ―

16 P/W 30A  Power windows

 

* Some Models

 

Replacing the fuses under the hood

 

If the headlights or other electrical components do not work and the fuses in the cabin are normal, inspect the fuse block under the hood. If a fuse is blown, it must be replaced. Follow these steps:
1. Make sure the ignition is switched off, and other switches are off.
2. Remove the fuse block cover.
3. If any fuse but the MAIN fuse is blown, replace it with a new one of the same amperage rating.

 

Normal fuse, Blown fuse

WARNING
Do not replace the main fuse by yourself. Have an Authorized Mazda Dealer perform the replacement. Replacing the fuse by yourself is  dangerous because the MAIN fuse is a high current fuse. Incorrect replacement could cause an electrical shock or a short circuit resulting in a fire.

Fuse Box under the hood

Main fuse under the hood

Fuse Panel Description - Fuse block (Engine compartment)

 

Fuse block Diagram - Engine compartment

DESCRIPTION ...........FUSE RATING............PROTECTED COMPONENT
1 FUEL HEAT ― ―....
2 FUEL PUMP  15A  Fuel pump
3 F.FOG  15A Fog lights *
4 P/W  20A  Power windows
5 HORN 10A Horn
6 EGI 10A Engine control system
7 DSC-P  30A  DSC
8 DSC-V  20A DSC
9 MAG  7.5A Air conditioner
10 TAIL  15A Taillights, Parking lights, License plate lights
11 STOP  10A  Brake lights
12 SWS 7.5A Air bag
13 R.DEF  20A  Rear window defroster
14 HAZARD  10A Hazard warning flashers, Turn signal lights
15 D/L  20 A Power door locks
16 EOP ― ―
17 ENG BAR 15A Engine control system
18 ENG INJ 15A  Engine control system
19 ENG INJ2 ― ―
20 H/L HI RH ― ―
21 H/L HI LH ― ―
22 DCDC3 ― ―
23 H/L LO RH 15A Headlight (RH)
24 H/L LO LH  15A  Headlight (LH)
25 AUDIO2 ― ―
26 DSC-V2 ― ―
27 HORN2 ― ―
28 METER ― ―
29 ROOM  15A  Overhead light
30 GLOW ― ―
31 EVVT ― ―
32 IG KEY 1  40A For protection of various circuits
33 FAN 3 ― ―
34 FAN 2 30A  Cooling fan
35 FAN 1 ― ―
36 INJ ― ―
37 IG KEY 2 30A For protection of various circuits
38 ― ―
39 ABS , DSC-P2 ― ―
40 BLOWER  30A Air conditioner

* Some Models

View / Download 2014 Mazda 2 Fuses Owner Manual